dingz dDi base
A versatile smart module with 2 independently switchable and dimmable outputs, allowing direct control of up to two lights or two blind motors. Configure outputs as dimmers or blinds via the DIP switches for flexible operation. Features input connections for remote switches or motion detectors and supports direct control of 230V heating valves.
The dDi +/- connection is for bus connection, e.g. DALI. (ddi = dingz digital interface)
Enhance your smart switch with dingz Front plus, featuring a built-in PIR motion detector for automatic, contactless control. Lights and blinds can adjust based on presence or absence, with customizable delay settings. For the best experience, we recommend installation by a professional.
The dingz Base is required to power your smart switch. For standard installations with independent dimming or direct blind control, choose dingz Base. If in addition you want to control DALI LEDs opt for dingz Base dDi. Both install easily on existing wiring—no extra hubs needed. If you need help choosing, contact us at hello@iolo.ch
Get in touch with us
Frequently asked questions
A detailed manual for the installation can be found here.
Yes, dingz can be accessed via a REST API, documentation on https://api.dingz.ch
If your dingz switch does not work, the following measures are possible:
1) Turn your dingz switch OFF and ON again
2) Perform a factory reset (the connection to the WiFi is lost and your dingz switch has to be reconfigured)
Press and hold both diagonal buttons 1 and 4 simultaneously for 10 seconds. The LED flashes 5x alternately white/red – this resets the settings of the dingz switch to the standard configuration. The connection to the WiFi is not lost.
Sonos & Phillips Hue must be set up first. Select “Sonos & Hue” in the top left menu and search for Sonos devices or authorize the Phillips Hue Bridge for dingz. You need to be on the same Wi-Fi network.
No, an update of the dingz FW cannot be undone for security reasons.
If a new FW version is available for dingz, it will be displayed in the dingz app. You can then choose yourself on which dingz the new FW version should be installed.